FL24-P Series ActiveLED® 24


  • FL24-P Series ActiveLED® 24" High Output Flood Lights - Flag Pole configuration for illuminating Buildings, Facades, Flag Poles and Signage, etc - 14 to 63 Watt Fixtures

  • FL24-P Series Fixtures run significantly cooler and are therefore much safer to the touch than traditional HID technology. Replaces up to 1,000 Watt legacy bulb technology

  • High light output and a CCT5000K color temperature provides crisp, bright and even accent lighting that closely emulates natural daylight

  • Fraction of conventional lighting costs and very low maintenance cost with a Lumen Lifetime of 90,000 hours (90% Luminous Flux)

  • Available options for even greater energy savings:
    • Motion Sensor
    • Daylight Sensor
    • Dimming capabilities

    EXAMPLE:
    A 50 Watt Floodlight that is dimmed down to light level 40, when there is no motion sensed for example, consumes just 4.5 Watts (9% of 50 Watt), a saving of 45.5 Watt, 91%

  • Environmentally Safe Lighting:
    • Zero mercury content
    • Eliminates disposal of
    hazardous materials
    • Facilitates LEED® points

  • Choice of fixture color - Silver, Brown, White, Bronze, Black or Charcoal Grey finish, other colors available on request

  • Precise adjustment of the angle of the flood light via the convenient end-mounting bolts (10mm) allows the fixture to be adjusted for maximum lighting effect



FL24-P Series ActiveLED® 24" High Output Flood Lights - Flag Pole configuration for illuminating Buildings, Facades, Flag Poles and Signage, etc - 14 to 63 Watt Fixtures

ActiveLED® flood lighting solves the problems of energy wastage, light pollution and maintenance. The design has optimized water management and cooling to be effective in the hottest of climates as well as performing without degradation down to -58 F (-50° C).

The FL24-P Series ActiveLED® Floodlight consumes at least 50-85 percent less energy than conventional lighting.
With its patented design and superior LED elements, the ActiveLED FL24-P Light is a reliable light source with a 90,000-hour lumen life (90% Luminous Flux), making it a maintenance-free solution for applications where changing bulbs and ballasts can be hazardous and expensive.

Significant additional energy savings from the device's optional daylight sensor, motion sensor and remote energy management features.

The FL24-P series ActiveLED Flood Light illuminates and accentuates flag poles and statuary that are close-by or buildings and facades that are 30 feet or more from the flood light with a bright, even light that closely emulates the color of natural daylight.

All the available light is directed onto the structure to be accentuated.

The employed technology delivers very precise light cut-off, virtually eliminating any light polution and overspill.

International Dark-Sky Association full cutoff compliant.

Fixture runs significantly cooler and is therefore much safer than traditional HID bulb technology.

FL24-P Series Product Overview

Ringdale provides five sizes (wattage) of ActiveLED 24" Flood Lights for varying applications, each is available in a choice of mountings and CCT color temperatures - 2700K, 3000K, 3500K, 4000K and 5000K (5000K recommended):

Product Code

Length & Wattage

Mounting

Light Output

Suggested Applications

FL24-AT-P50R12

24", 14 Watt

AllThread

~1,648 Lumens

Flagpoles, Buildings

FL24-3K-P50R24

24", 26 Watt

Knuckle J-Box

~3,094 Lumens

Flagpoles, Buildings

FL24-4K-P50R36

24", 38 Watt

Knuckle Tennon

~4,522 Lumens

Flagpoles, Buildings

FL24-2S-P50R48

24", 50 Watt

Stirrup Mount

~5,950 Lumens

Flagpoles, Buildings

FL24-4K-P50R60

24", 63 Watt

Knuckle Tennon

~7,497 Lumens

Flagpoles, Buildings

ActiveLED® FL24-P Series Flood Light Options & Selections

Each ActiveLED flood light can be configured from a comprehensive list of options that tailor the fixture to most applications:

• LED Light Output

Select 12, 24, 36, 48 or 60 Watt LEDs (14, 16, 38, 50 or 63 Watt Fixtures)

• Light Pattern

Pre-configured for "Flag Pole" light pattern

• Fixture Color

Select Silver, White, Charcoal Grey, Bronze, Black or Brown

• Second Diffuser

Select Clear, Mottled or Bullet Resistant

• Daylight Sensor

Optional digital photocell

• Energy Management

Optional Motion Sensor, Dimming, IR Receiver

• Driver Options

Select AC only, AC with Solar Backup or Solar Only

• Mount Configurations

Specify Allthread, Swivel Trunnion or Knuckle J-Box mount

ActiveLED® Technology

Ringdale uses the latest in energy efficient LEDs and LED Modules producing equal or greater light output than HID light fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).

ActiveLED® Diffuser Technology

We use state-of-the-art diffuser technology with a minimal amount of light loss within the fixture providing for maximum lighting efficiency.

ActiveLED® Warranties

We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, fixtures and drivers / power supplies.

Extended 2 year Warranty is available when a FL24 Series fixture is used in conjunction with an ActiveLED Surge Protection Device (SPD). See “Limited Warranty for Ringdale Industries and ActiveLED Lighting Products” or to see the warranty document CLICK HERE.

Ringdale is an ISO 9001:2000 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.

NOTE: Mounting hardware sold separately.

ActiveLED® FL24-P Series sample Part Numbers:

FL24U-AT-PF50R12WH, 24" 12/14 Watt White
FL24U-AT-PF50R24WH, 24" 24/26 Watt White
FL24U-AT-PF50R36WH, 24" 36/38 Watt White
FL24U-AT-PF50R48SL, 24" 48/52 Watt Silver
FL24U-AT-PF50R60BZ, 24" 60/62 Watt Bronze


Technical Information

Input Voltage:• Auto-sensing 100..277V AC, 50/60 Hz
• Digital Power Source, dedicated circuit strongly recommended
Operating Temperature:-58° F to +149° F (-50° C to +65° C)
Power Statistics:


Power Factor:
Dependent upon model:
• 14 to 63 Watt Fixtures
• 12 to 60 Watt LEDs

0.95 (at 208 Volts)
Light Output Equivalent:Up to 500 Watt legacy HID bulb technology
CCT Color Temperature:2700K, 3000K, 3500K, 4000K and 5000K in accordance with ANSI C78.377A
FL24 Flood Light Dimensions24" (l) x 6.1" (w) x 4.8" (h)(60.9 x 15.6 x 12.1)
FL24 Flood Light Weight:28 lb (12.7 Kg)
Listings and Tests:cUL Listed Driver, CE, suitable for damp locations.
TM21 based on CALIPER ISTM Test to UL1598
CALIPER LM-79 Report, LM-80 info available
CE File, RoHS compliant, IP66 Rated.
Conforms to FCC Part 15.19 Subpart B Class A

Caution! All specifications published herein are subject to change without notice. See website ActiveLED.com for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale.com for Terms and Condtions of Sale and Service.