FL-Sol Series ActiveLED® Solar Flood Lights with Integrated Charge Controller for Battery Pack

  • FL-Sol Series ActiveLED® Solar-Ready LED Flood Light - Integrated Solar Controller for cost-effective and simplified solar system design

  • Simple, straightforward new or retrofit and virtually maintenance-free.
    Bright illumination with no light trespass - full cutoff compliant

  • Industry-leading integrated technology that delivers affordable and simplified Solar Lighting Systems by reducing the system to its base components:
    • Solar Fixture / Controller
    • Solar Array
    • Deep-Cycle Solar Battery Pack

  • Improved light quality and uniform illumination compared to legacy bulb technology

    Lumen Lifetime of 90,000 hours (90% Luminous Flux)

  • Environmentally Safe Lighting:
    • Zero mercury content
    • Eliminates disposal of
    hazardous materials
    • Facilitates LEED® points

  • Optional controls for additional energy savings:
    • Motion Sensor
    • Light Space Management
    • IR Receiver module for
    remote management

    An ActiveLED Flood Lighting System of 72 Watt that is dimmed down to light level 40, for example after 2 am when it is very dark and traffic is light, consumes just 6.75 Watt (9% of 75 Watt), saving 68.25 Watt, 91%

  • Choice of light fixture wattage, see table for details.

    Choice of fixture colors - Silver, White, Charcoal Grey, Brown, Bronze or Black finish.
    Custom colors available on request

  • Precise adjustment of the angle of the flood light via the convenient end-mounting bolts (10mm) allows the fixture to be adjusted for most applications and configurations

FL-Sol Series ActiveLED® Solar-Ready LED Flood Lights - Integrated Solar Controller for cost-effective and simplified solar system design

Solar-Ready ActiveLED® Flood Light Fixtures have a highly-efficient Solar Controller integrated into the LED Driver / Power Source.

The FL-Sol Series is a market first from ActiveLED - a market leader in LED lighting systems

FL-Sol Series ActiveLED fixtures make off-grid solar lighting an easy reality.

With an integrated Solar Controller, the FL-Sol Series ActiveLED light fixtures have one less system component compared to other solar light solutions, making the installation and maintenance process far simpler and less expensive. The innovative FL-Sol Series design effectively eliminates the need for a costly separate Solar Controller.

The Solar-Ready Flood Lights are cost effective to install and have a light output similar to 75 through 1,000 Watt HPS / HID fixtures.

Both the Solar Array and the Battery Pack connect directly to the FL-Sol Solar-Ready fixture via low-voltage DC cables. One Solar Array (up to 220 watts, 46 Volts DC and 8 Amps) and one Battery Pack (12 Volt DC or 48 Volt DC, 48 VDC recommended) are supported.

With its patented design and superior LED elements, ActiveLED Solar fixtures are a reliable light source with a 90,000-hour lumen life, making it a maintenance-free solution for applications where changing bulbs and ballasts can be hazardous and expensive.

ActiveLED® FL-Sol Series Solar-Ready Product Overview

Any 12, 18, 24, 48 or 72 Watt version ActiveLED Flood Light fixture can be factory-configured as a Solar-Ready Flood Light fixture. The following is just a small example of some of the available configurations for different applications:

Product Code

Fixture Length

Max LED Wattage

Solar & Battery Management

Light Output



Up to 18 watts


~88 Lumens / Watt



Up to 24 watts


~88 Lumens / Watt



Up to 36 watts


~88 Lumens / Watt



Up to 48 watts


~88 Lumens / Watt



Up to 72 watts


~88 Lumens / Watt

ActiveLED® FL-Sol Series Solar-Ready Flood Light Fixture Selections

Solar-Ready ActiveLED light fixtures can be configured from a comprehensive list of options to meet most application requirements, including the following:



LED Light Output:

12, 18, 24, 48 or 72 Watt LEDs - 14, 20, 26, 52 or 75 Watt Fixtures

Fixture Overall Length:

8.25", 11", 13", 24" or 40", dependent upon Wattage & Configuration

Fixture Color:

Silver, White, Charcoal Grey, Bronze, Black or Brown

Second Diffuser:

Clear (default) or Patterned (mottled)

Daylight Sensor:

The Solar Panel is the daylight sensor that triggers the light to turn on or off

Energy Management:

Optional Motion Sensor, LightSpace Management, IR Receiver Module

Mounting Options:

Comprehensive selection of mounting options, refer to separate listing for details

Battery Pack Management

The ActiveLED FL-Sol fixtures employ a highly efficient Integrated Solar Controller / Driver that is factory-configured for charging either Sealed Lead Acid (SLA) or Lithium-Iron Phosphate (LiFePO)Batteries. For example, it has three levels of battery charging for SLA Batteries at room temperature:


Bulk Charging of the battery pack until the battery voltage reaches about 14.7 volts for a 12-volt system or about 58.8 volts for a 48-volt system.


Absorption charging for 2 hours.


Float or Trickle charging at 13.5 volts for a 12 volt system and 54 volts for a 48-volt system.

ActiveLED® Similar Products

ActiveLED offers a wide variety of Solar Lighting Products constructed with the most advanced lighting technology available today.

ActiveLED® Technology

ActiveLED uses the latest in energy efficient LEDs and LED Modules producing equal or greater light output than legacy bulb fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).

ActiveLED® Diffuser Technology

We use state-of-the-art diffuser technology with a minimal amount of light loss within the fixture providing for maximum lighting efficiency.

To meet varying application requirements, the ActiveLED Solar-Ready Flood Lights can be configured with either a clear or a "diffused" second diffuser.
The second diffuser completely seals the underside of the fixture, preventing the ingress of water, dust and insects.

ActiveLED® Warranties

We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, fixtures, drivers / power supplies and integrated solar controllers.

ActiveLED is an ISO 9001:2000 company, registered under BSI certificate FM-1880. ActiveLED provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.

NOTE: Mounting brackets not included, brackets sold separately.

ActiveLED® FLS Solar-Ready Series, sample Part Numbers:

8.25" flood light, All-Thread mount, Low Fe clear glass diffuser, CCT5000K, 18 watts of LEDs, Bronze fixture color

11.0" flood light, All-Thread mount, Low Fe clear glass diffuser, CCT5000K, 24 watts of LEDs, Silver fixture color

13.0" flood light, All-Thread mount, Low Fe clear glass diffuser, CCT5000K, 36 watts of LEDs, Charcoal-Grey color

24.0" flood light, All-Thread mount, Low Fe clear glass diffuser, CCT5000K, 48 watts of LEDs, Silver fixture color

40.0" flood light, All-Thread mount, Low Fe clear glass diffuser, CCT5000K, 72 watts of LEDs, White fixture color

NOTE: 72 Watt version requires 48 VDC battery pack

Technical Information

Nominal Input Voltage: 12, 24 or 48 Volts DC (48 VDC recommended)
Note: No AC line support
Solar Array:

Battery Pack:
Rated for a Solar Array or Wind Turbine up to 220 watts,
8 to 48 Volts DC, 8 Amps maximum

12, 24 or 48 Volts DC (48V DC recommended)
Power Statistics:Dependent upon model selected:
• Up to 72 Watt LEDs
• Up to 75 Watt Fixtures
DC Drive Efficiency:

Charging Efficiency:
~ 98%

> 96% typical
Operating Temperature:-58° F to 149° F (-50° C to 65° C)
Listings & Tests:cUL listed, CE, suitable for damp locations.
RoHS compliant. IP66 rated.
LM-79 and LM-80 info available.
Conforms to FCC Part 15.19 Subpart B Class A

6"(W) x 4"(H) x 40"(L)(15.2 x 10.2 x 101.6 cm)

27 lbs (12.2 Kg)
CCT Color Temperature:3500K, 4000K or 5000K, in accordance with ANSI C78.377A

Caution! All specifications published herein are subject to change without notice. See website ActiveLED.com for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale-technology.com for Terms and Condtions of Sale and Service.

+44 (0)844 264 1570