SSB Series ActiveLED® ShoeBox Streetlights with Integrated Solar Controller


  • SSB-GR Series ActiveLED® ShoeBox Streetlights with Integrated Solar Controller

  • Ideal applications include:
    • Streets
    • Parking lots
    • Walkways
    • Pedestrian areas
    • Other outdoor applications

  • Industry-leading integrated technology that delivers affordable and simplified Solar Lighting Systems by reducing the system to its base components:
    • Solar Fixture / Controller
    • Solar Array
    • Solar Battery Pack

  • Improved light quality and illumination uniformity compared to legacy bulb technology

    Lumen Lifetime of 90,000 hours (90% Luminous Flux)

  • Environmentally Safe Lighting:
    • Zero mercury content
    • Eliminates disposal of
    hazardous materials
    • Facilitates LEED® points

  • Optional controls for additional energy savings:
    • Motion Sensor
    • Light Space Management
    • IR Receiver module for
    remote management

  • Choice of light fixture wattage, see table for details

    Choice of fixture colors - Silver, White, Charcoal Grey or Brown finish.
    Custom colors available on request

  • Configuration Options:
    • Clear or Mottled second Diffuser.
    • Traditional, Wide or Xtra-Wide Light Pattern.
    • Pole mounting options



SSB Series ActiveLED® ShoeBox Streetlights with Integrated Solar Controller

Solar-Ready ActiveLED® ShoeBox Streetlight / Parking Lot Light Fixtures have a highly-efficient Solar Controller integrated into the LED Driver / Power Source.
The SSB Series is a market first from Ringdale - a market leader in LED lighting systems

ActiveLED® SSB Series ActiveLED fixtures make off-grid solar lighting an easy reality.

With an integrated Solar Controller, the SSB Series ActiveLED light fixtures have one less system component compared to other solar light solutions, making the installation and maintenance process far simpler and less expensive. The innovative SSB Series design effectively eliminates the need for a costly separate Solar Controller.

The SSB Series Solar-Ready ShoeBox Lights are cost effective to install and have a light output similar to 75 through 600 watt HPS / HID fixtures.

Both the Solar Array and the Battery Pack connect directly to the SSB Solar-Ready fixture via low-voltage DC cables. One Solar Array (up to 220 watts and 46 Volts DC) and one Battery Pack (12 Volt DC or 48 Volt DC, 48 VDC recommended) are supported. Note that the 72/75 watt fixture will require a 24-volt battery pack (mandatory).

With its patented design and superior LED elements, the SSB Series of fixtures are a reliable light source with a 90,000-hour lumen life, making it a maintenance-free solution for applications where changing bulbs and ballasts can be hazardous and expensive.

ActiveLED® SSB Series Solar-Ready Product Overview

Any 24 watt, 48 watt or 72 watt version ActiveLED ShoeBox light fixture can be factory-configured as a Solar-Ready Light Fixture. The following is just a small example of some of the available configurations for different applications:

SSB Series
Solar Fixture
Product Code

SSB Series
Solar Fixture
Product Suitability

SSB
Solar Fixture
Wattage

SSB
Light Equivalence
HPS / HID

SSB
Suggested Mounting
Height, M / Ft

SSB-5528T

Pathway / Parking Lot

26 watts

75 to 150 watts

4.0m / 13 ft

SSB-5528W

Pathway / Parking Lot

26 watts

75 to 150 watts

4.0 m / 13 ft

SSB-5551T

Street / Highway

52 watts

150 to 400 watts

6.0 m / 20 ft

SSB-5551W

Street / Highway

52 watts

150 to 400 watts

6.0 m / 20 ft

SSB-5551XW

Street / Highway

52 watts

150 to 400 watts

6.0 m / 20 ft

SSB-5575XW

Street / Highway

75 watts

250 to 600 watts

7.5 m / 25 ft

ActiveLED® Solar-Ready Series Light Fixture Selections

Solar-Ready ActiveLED light fixtures can be configured from a comprehensive list of options to meet most application requirements, including the following:

FIXTURE OPTIONS SELECTION CHOICES
LED Light Output Choice of 24, 48 or 72 Watts of LEDs - 26, 52 or 75 Watts Fixture
Light Pattern (T) Traditional, (W) Wide or (XW) Xtra-Wide Angle pattern
Fixture Color Silver, White, Charcoal Grey or Brown
Second Diffuser Patterned (mottled) or Clear
Daylight Sensor Solar Panel is the daylight sensor that triggers the light to turn on or off
Energy Managemen Optional Motion Sensor, LightSpace Management, IR Receiver Module
Fixture Direct Mounting Square Pole, Round Arm or Pole Top (specify at time of ordering)
Mounting Bracket Options Optional Adapter for mounting on Round Extension Arm
(Ringdale part 00-27-0002-0003)

Optional 6.5" Extension Mounting Bracket
(Ringdale part 00-27-0002-0011)

Optional Adapters for mounting on Round / Square / Wood Pole
(Ringdale part 00-27-0009-0001, 00-27-0009-0002)

Battery Pack Management

The ActiveLED SSB series fixtures employ a highly efficient Integrated Solar Controller / Driver that has three levels of battery charging (the following data is for room temperature):

1 Bulk Charging of the battery pack until the battery voltage reaches about 14.7 volts for a 12-volt system or about 58.8 volts for a 48-volt system.
2 Absorption charging for 2 hours.
3 Float or Trickle charging at 13.5 volts for a 12 volt system and 54 volts for a 48-volt system.

ActiveLED® Technology

Ringdale uses the latest in energy efficient LEDs and LED Modules producing equal or greater light output than fluorescent light fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).

ActiveLED® Diffuser Technology

We use state-of-the-art diffuser technology with a minimal amount of light loss within the fixture providing for maximum lighting efficiency.

To meet varying application requirements, the ActiveLED Solar-Ready ShoeBox Lights can be configured with either a clear or a "diffused" second diffuser.
The second diffuser completely seals the underside of the fixture, preventing the ingress of water, dust and insects.

The ActiveLED Light Fixture with the clear low-iron glass second diffuser maintains the uniform light pattern and increases the task pattern. This is ideal for installations where a higher light level is required at the outer areas of the light pattern as it increases luminance by 15-20%, depending on the angle of light emanating from the fixture and the installation height. The textured second diffuser provides a more "diffused" light pattern, particularly where the light fixture is installed at a height of less than 12 feet.

ActiveLED® SSB Series ShoeBox Light Pattern Options

The ActiveLED SSB SEries Solar-Ready ShoeBox Lights are available in either Traditional, Wide or Xtra-Wide light pattern configurations.

Traditional Pattern (Roadway Type II) - when mounted at 20 feet high, projects light 3-4 feet behind the pole and has an illumination pattern on the street-side in an arc of about 30 feet.

Wide Pattern (Roadway Type III) - has a broad uniform light coverage. Mounted at 20 feet high, it has a very precise 1-2 foot curb-side cut-off with very little light projected behind the curb line. It has an illumination pattern on the street-side in an arc of about 40-50 feet on each side of the curb line extending to 60 feet perpendicular at 90 degrees from the curb line on the street side.

Xtra-Wide Pattern (Roadway Type V) - has a broad uniform light coverage to the front, back, left and right of the fixture.

ActiveLED® Warranties

We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements and fixtures, 5 years on power supplies and integrated solar controllers.

Ringdale is an ISO 9001:2000 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.

NOTE: Pole and Pole Base are not included in the price.

ActiveLED® SSB Series Solar-Ready ShoeBox Fixture, sample Part Numbers:

00-27S-1618T-5528 26 watts, Traditional Pattern
00-27S-1618W-5528 26 watts, Wide Pattern
00-27S-1618XW-5528 26 watts, Xtra-Wide Pattern
---
00-27S-1618T-5551 51 watts, Traditional Pattern
00-27S-1618W-5551 51 watts, Wide Pattern
00-27S-1618XW-5551 51 watts, Xtra-Wide Pattern
---
00-27S-1618T-5575 75 watts, Traditional Pattern
00-27S-1618W-5575 75 watts, Wide Pattern
00-27S-1618XW-5575 75 watts, Xtra-Wide Pattern

NOTE: 72/75 watt fixture requires connection to a 48 VDC battery pack (mandatory).


Technical Information

Input Voltage:


Power Statistics:
12 Volts DC or 48 Volts DC (48 VDC recommended)
Note: No AC line support

Dependent upon model selected:
• Up to 72 Watts LED
• Up to 75 Watts Fixture
Solar Array:

Battery Pack:
Rated for a Solar Array or Wind Turbine up to 220 watts,
8 to 48 Volts DC, 6 Amps maximum

12 Volts DC or 48 Volts DC (48 VDC recommended)
Charging Efficiency:

DC Drive Efficiency:
> 96% typical

98%
Listings & Tests:cUL listed, CE, suitable for damp locations.
RoHS compliant. IP66 rated.
LM-79 and LM-80 info available.
Conforms to FCC Part 15.19 Subpart B Class A
Operating Temperature:-58° F to +149° F (-50° F to +65° C)
IES Roadway Classifications:• Type II (Traditional Pattern)
• Type III (Wide Pattern)
• Type V (Xtra-Wide Pattern)
Dimensions:

Weight:
22" (L) x 16" (W) x 6" (H)(55.9 x 40.6 x 15.2 cm)

30 lbs (13.6 Kg) (with glass diffuser)
CCT Color Temperature:5000K, in accordance with ANSI C78.377A

Caution! All specifications published herein are subject to change without notice. See website ActiveLED.com for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale.com for Terms and Condtions of Sale and Service.